1. Start: Before starting the electric stacker, check whether the battery is fully charged and the indicator light is displayed normally. Insert the key into the keyhole and turn the starting device clockwise.
2. Forward/backward: pull back the control handle of the electric pallet stacker equipment, swing it downward to the vertical position, and then rotate the two rotary switches through the thumb. Different devices rotate in different directions. The speed of the equipment forward and backward is also controlled by the Angle of the rotary switch. When the operating space around us is small, the operation speed of the equipment should not be too fast for safety.
3. Fork lifting: the lifting of electric stacker is generally on the control handle, and there is a button on the handle to control the rise of the fork; The button of the down mark controls the fork down; The device will stop lifting when we release the button.
4. Safety switch: When the electric stacker is backing up, touch the red safety switch, the equipment will immediately stop backing operation, and move forward in the opposite direction for a distance; To prevent the body from being hurt by extrusion when operating.
5.Parking operation: smooth parking electric stacker equipment, only need to control the forward/backward rotation switch reset, this time the controller will produce reverse current, let our equipment in a short distance to stop smoothly, so we should pay attention to the control distance when parking equipment.
6.Daily charging: when the equipment is short of power, it is necessary to charge in time. When charging, pay attention to close the electric lock and pull out the key to prevent miscontact and other safety problems in the charging process.
The operation of electric stacker is not difficult, but we must pay attention to the relevant safety operation problems in the operation to avoid safety problems in the operation process.
Post time: Mar-22-2023