Manual hydraulic lift truck is a small and convenient, flexible, heavy load, durable short distance cargo handling tools, it is sensitive to transport, sensitive operation, small turning radius and other advantages. It can be used in factories, production workshops, storage, stations, wharves, airports, etc., due to the frequent use of manual hydraulic forklift truck, its bearing wheels are too seriously worn, and the overall structure of manual forklift truck parts is relatively simple. In the replacement of manual hydraulic forklift wheels, you can refer to the following methods to directly replace them.
First, manual hydraulic forklift wheel material, pay attention to the material of the wheel when choosing manual hydraulic forklift wheel, manual hydraulic forklift wheel has nylon wheel, PU wheel. The wheel of nylon applies to apply to cement floor more, wear-resistant. The PU wheel is suitable for the better ground, the ground plays a protective role, does not hurt the ground. Forklift users can choose the texture of forklift wheels according to their own environment.
Second, manual hydraulic forklift wheel size, different tonnage of manual hydraulic forklift wheel size is different, under normal circumstances commonly used manual hydraulic forklift wheels are 180*50-47, 200*50-47, 180*50-52, 200*50-52, 180*65-47,80*70-47, 60-47, 80 * 65 * 60-47. Can inform customer service of their own manual hydraulic forklift wheel specifications and dimensions.
Three, the manual hydraulic forklift wheel replacement method is as follows.
The replacement and the original car can be installed at the same size, first knock off the opening pin with steel nails, and then play out the wheel shaft, and then take the wheel down in order, and then install on the pin, in the opposite order. If the manual hydraulic forklift wheel has rust, the bearing wheel to find a strong hardness of the firing pin, the wheel and shaft hollow pin hit out, and then the small wheel shaft, wheel and bearing replaced together. If the bearing wheel rusts too much, it will be worn off with a grinder. Or the whole set can be replaced. The big wheel is relatively simple. Generally, the big wheel can be knocked out by disassembling the cardigan with a hammer.
Post time: Sep-14-2022