1. Start to maintain the proper speed, should not be too fierce.
2. Pay attention to observe the voltage of the voltmeter. If the voltage is lower than the limit voltage, the forklift should stop running immediately.
3. In the process of walking, is not allowed to change the direction of the direction of the switch, in order to prevent burning electrical components and damage the gear.
4. Driving and lifting should not be carried out simultaneously.
5. Pay attention to whether the sound of the driving system and steering system is normal. If abnormal sound is found, troubleshoot it in time.
6. Slow down in advance when changing.
7. When operating on poor roads, its importance should be appropriately reduced, and the driving speed should be reduced.
Attentions
1. The weight of the goods must be understood before lifting. The weight of the goods must not exceed the rated weight of the forklift.
2. When lifting the goods, attention should be paid to whether the goods are securely wrapped.
3. According to the size of the goods, adjust the cargo fork spacing, so that the goods evenly distributed between the two forks, avoid unbalanced load.
4. When the goods are inserted into the cargo pile, the mast should lean forward, and when the goods are loaded into the goods, the mast should lean back, so that the goods are close to the fork surface, and the goods can be lowered as far as possible, then they can be driven.
5. Lifting and lowering goods should generally be carried out in a vertical position.
6. In the manual loading and unloading, the hand brake must be used to make the goods stable.
7. Walking and lifting are not allowed to operate at the same time.
8. When carrying goods on the large slope road surface, pay attention to the firmness of the goods on the fork.
Post time: Nov-29-2022